INSULATED UNITS:
THE PRC 590 SEALANT UTILIZES A CHEMICAL ADHESION SYSTEM THAT BONDS TO GLASS
AND METAL SURFACE.
UNITS CAN BE MADE ALMOST ANY THICKNESS. SPACERS START AT 7/32" UP TO 3/4".
WE ALSO CAN MAKE DUAL SEALED INSULATED UNITS USING PIB PRIMARY SEALANT AND
SILICONE SECONDARY SEALANT. MOST LARGER UNITS AND ANY ORDER REQUESTING WE
USE SILICONE AS A SEAL CAN BE MADE WITH THE SAME LEAD TIME AT A MINIMAL UP
CHARGE FOR THE SILICONE.
OUR INSULATED UNITS ARE A NEATER UNIT WITHOUT THE EXCESS MATERIAL ON AND
AROUND THE EDGES, WHICH MEET OR EXCEED THE REQUIREMENTS OF SPEC. ASTM-E774.
A ONE-PART, HOT-APPLIED, CHEMICALLY CURING SILICONE MODIFIED, POLYURETHANE
SEALANT DEVELOPED FOR USE IN PRODUCING HIGH PERFORMANCE INSULATING GLASS
UNITS IS WHAT WE USE.
ARGON STAYS IN LONGER-MOISTURES STAYS OUT LONGER !! OUR UNITS HAVE LOW
MOISTURE VAPOR TRANSMISSION RATE.
SPECIFICATIONS:
ALL MATERIAL SHALL BE SUBJECT TO TOLERANCES AND VARIATIONS CONSISTENT WITH
USAGES OF THE TRADE AND REGULAR FACTORY PRACTICES CONCERNING DIMENSIONS,
WEIGHT, STRAIGHTNESS, THICKNESS, COMPOSITION AND MECHANICAL PROPERTIES;
NORMAL VARIATIONS IN SURFACE, INTERNAL CONDITIONS, AND QUALITY; AND DEVIATIONS
FROM TOLERANCES AND VARIATIONS CONSISTENT WITH PRACTICAL TESTING AND
INSPECTIONS METHODS.
DESICCANT IS AN ABSORBANT MATERIAL WHICH REDUCES DEW POINTS OF ENTRAPPED
AIR TO GIVE THE LONGEST PROTECTION AGAINST ANY MOISTURE CONDENSATION OR
VOLATILE FOGGING BETWEEN THE GLASS.
WE USE A ROLLED FORM OF SPACERS ANODIZED ALUMINUM DESIGNED TO RECEIVE THE
MAXIMUM AMOUNT OF SEALANT FOR ADHERESION AND DESICCANT FOR ABSORPTION.
WARRANTY: TEMP-TECH INDUSTRIES INC WARRANTS THAT FOR A PERIOD OF TEN (10)
YEARS FROM THE DATE OF MANUFACTURE, UNDER NORMAL CONDITIONS OF USE,
MATERIAL OBSTRUCTION OF VISION RESULTING FROM FILM FORMATION OR DUST
COLLECTION BETWEEN THE INTERIOR GLASS SURFACES OF INSULATING UNITS
MANUFACTURED BY TEMP-TECH INDUSTRIES INC WILL NOT OCCUR.
THE PRC 590 SEALANT UTILIZES A CHEMICAL ADHESION SYSTEM THAT BONDS TO GLASS
AND METAL SURFACE.
UNITS CAN BE MADE ALMOST ANY THICKNESS. SPACERS START AT 7/32" UP TO 3/4".
WE ALSO CAN MAKE DUAL SEALED INSULATED UNITS USING PIB PRIMARY SEALANT AND
SILICONE SECONDARY SEALANT. MOST LARGER UNITS AND ANY ORDER REQUESTING WE
USE SILICONE AS A SEAL CAN BE MADE WITH THE SAME LEAD TIME AT A MINIMAL UP
CHARGE FOR THE SILICONE.
OUR INSULATED UNITS ARE A NEATER UNIT WITHOUT THE EXCESS MATERIAL ON AND
AROUND THE EDGES, WHICH MEET OR EXCEED THE REQUIREMENTS OF SPEC. ASTM-E774.
A ONE-PART, HOT-APPLIED, CHEMICALLY CURING SILICONE MODIFIED, POLYURETHANE
SEALANT DEVELOPED FOR USE IN PRODUCING HIGH PERFORMANCE INSULATING GLASS
UNITS IS WHAT WE USE.
ARGON STAYS IN LONGER-MOISTURES STAYS OUT LONGER !! OUR UNITS HAVE LOW
MOISTURE VAPOR TRANSMISSION RATE.
SPECIFICATIONS:
ALL MATERIAL SHALL BE SUBJECT TO TOLERANCES AND VARIATIONS CONSISTENT WITH
USAGES OF THE TRADE AND REGULAR FACTORY PRACTICES CONCERNING DIMENSIONS,
WEIGHT, STRAIGHTNESS, THICKNESS, COMPOSITION AND MECHANICAL PROPERTIES;
NORMAL VARIATIONS IN SURFACE, INTERNAL CONDITIONS, AND QUALITY; AND DEVIATIONS
FROM TOLERANCES AND VARIATIONS CONSISTENT WITH PRACTICAL TESTING AND
INSPECTIONS METHODS.
DESICCANT IS AN ABSORBANT MATERIAL WHICH REDUCES DEW POINTS OF ENTRAPPED
AIR TO GIVE THE LONGEST PROTECTION AGAINST ANY MOISTURE CONDENSATION OR
VOLATILE FOGGING BETWEEN THE GLASS.
WE USE A ROLLED FORM OF SPACERS ANODIZED ALUMINUM DESIGNED TO RECEIVE THE
MAXIMUM AMOUNT OF SEALANT FOR ADHERESION AND DESICCANT FOR ABSORPTION.
WARRANTY: TEMP-TECH INDUSTRIES INC WARRANTS THAT FOR A PERIOD OF TEN (10)
YEARS FROM THE DATE OF MANUFACTURE, UNDER NORMAL CONDITIONS OF USE,
MATERIAL OBSTRUCTION OF VISION RESULTING FROM FILM FORMATION OR DUST
COLLECTION BETWEEN THE INTERIOR GLASS SURFACES OF INSULATING UNITS
MANUFACTURED BY TEMP-TECH INDUSTRIES INC WILL NOT OCCUR.
|
IF THE INSULATED UNIT (S) EXCEEDS ANY ONE OF THE ABOVE LIMITATIONS IT WOULD
THEN FALL UNDER THE CATAGORY OF "SPECIAL SIZE LIMITATIONS"
FOR FULL WARRANTY DETAILS, PLEASE CONTACT US.
THEN FALL UNDER THE CATAGORY OF "SPECIAL SIZE LIMITATIONS"
FOR FULL WARRANTY DETAILS, PLEASE CONTACT US.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 | |  | |  | |  |