CUSTOMER GLASS:
CUSTOMERS CAN BRING THEIR GLASS IN FOR
TEMPERING, POLISHING, HOLE DRILLING, AND TO BE
MADE INTO INSULATED UNITS. WHAT WE ASK FOR IS A
FAX TELLING US WHAT YOU WANT DONE WITH THE
GLASS.
WE DO HAVE RESTRICTIONS ON TEMPERING GLASS WITH
HOLES. I HAVE PROVIDED DIAGRAMS SHOWING THE
DIAMETER THAT THE HOLES NEED TO BE AND THE
LOCATION OF THE HOLES SO THAT WE MAY SAFELY
TEMPER WITHOUT BREAKAGE.
CUSTOMERS CAN BRING THEIR GLASS IN FOR
TEMPERING, POLISHING, HOLE DRILLING, AND TO BE
MADE INTO INSULATED UNITS. WHAT WE ASK FOR IS A
FAX TELLING US WHAT YOU WANT DONE WITH THE
GLASS.
WE DO HAVE RESTRICTIONS ON TEMPERING GLASS WITH
HOLES. I HAVE PROVIDED DIAGRAMS SHOWING THE
DIAMETER THAT THE HOLES NEED TO BE AND THE
LOCATION OF THE HOLES SO THAT WE MAY SAFELY
TEMPER WITHOUT BREAKAGE.
WE ARE MORE THAN HAPPY TO RUN ANY THICKNESS
GLASS OVER OUR MINIMUM SIZES, AS CUSTOMER
GLASS ANY CUSTOMER GLASS THAT IS DROPPED OFF AT
OUR SHOP BEFORE 3:30 WILL TEMPERED OVERNIGHT
FOR PICK-UP THE NEXT MORNING.
GLASS OVER OUR MINIMUM SIZES, AS CUSTOMER
GLASS ANY CUSTOMER GLASS THAT IS DROPPED OFF AT
OUR SHOP BEFORE 3:30 WILL TEMPERED OVERNIGHT
FOR PICK-UP THE NEXT MORNING.
CUSTOMERS SHALL BE RESPONSIBLE FOR ALL
BREAKAGE, SCRATCHES, CHIPS AND HOLDING TO
DIMENSION. CUSTOMER'S GLASS MUST HAVE
ACCEPTABLE EDGEWORK IF IT IS TO BE SUCCESSFULLY
TEMPERED. GLASS RECEIVED WITH INSUFFICIENT
EDGEWORK WILL BE EDGED BY US. GLASS UP TO AND
INCLUDING 1/4" WILL BE $.05/LINEAR INCH, 3/8" AND 1/2"
REQUIRES A MINIMUM OF A GROUND EDGE.
BREAKAGE, SCRATCHES, CHIPS AND HOLDING TO
DIMENSION. CUSTOMER'S GLASS MUST HAVE
ACCEPTABLE EDGEWORK IF IT IS TO BE SUCCESSFULLY
TEMPERED. GLASS RECEIVED WITH INSUFFICIENT
EDGEWORK WILL BE EDGED BY US. GLASS UP TO AND
INCLUDING 1/4" WILL BE $.05/LINEAR INCH, 3/8" AND 1/2"
REQUIRES A MINIMUM OF A GROUND EDGE.
OBSCURE 1/8" PATTERN GLASS BROUGHT IN BY
CUSTOMERS WILL NOT BE LABELED WITH OUR
TEMPERING LOGO. THOUGH WE WILL PUT IT THROUGH
OUR TEMPERING MACHINE BECAUSE OF THE MATERIAL
MAKE OF THE GLASS WE CAN NOT DETERMINE IF THE
GLASS IS TEMPERED. THIS MATERIAL WILL BE NOTED
AS HEAT TREATED AND MAY NOT MEET TEMPERING
COMPLIANCE.
CUSTOMERS WILL NOT BE LABELED WITH OUR
TEMPERING LOGO. THOUGH WE WILL PUT IT THROUGH
OUR TEMPERING MACHINE BECAUSE OF THE MATERIAL
MAKE OF THE GLASS WE CAN NOT DETERMINE IF THE
GLASS IS TEMPERED. THIS MATERIAL WILL BE NOTED
AS HEAT TREATED AND MAY NOT MEET TEMPERING
COMPLIANCE.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 | |  | |  | |  |